How to setup your PoolScout Wireless Camera

1. Charge the camera with a USB-C cable for at least 1 hour

2. Press the On button for 3 to 5 seconds, located on the underside of the camera

3. Wave at the camera to confirm the flashing green light

4. When the camera is flashing green, show the QR code to the lens at a 10-20 inches distance

5. Press ‘Continue’ once the camera has prompted a successful connection

The camera seems to be in a loop and I am seeing a periodic red light, what to do?

1. Wait for the red light to appear again, then once its on, press down the On button for 3-5 seconds

2. That should allow the camera to restart

3. You can now continue from point 3 above